Regenerator digital signals ADSL/ADSL2plus-2
COM_VIRTUEMART_PRODUCT_NOSTOCK
Regenerator digital signals ADSL/ADSL2plus-2
|
Maximum power consumption
|
less than 100 mW |
| Current consumption | less than 2 mA |
| Degree of protection | IP65 |
DescriptionGeneral information
The regenerator is designed to increase the speed and range of digital information in ADSL / ADSL2plus Annex A. The regenerator is able to increase the range of existing ADSL / ADSL2 / ADSL2 + lines that serve DSLAM and MSAN and have a minimum length of 3 km, up to 7 km (with a conductor diameter 0.5 mm).
Power is supplied by direct current from a subscriber line with a nominal voltage of 48 V. If there is no subscriber line voltage, power is supplied from an external power source with a voltage of 48 V with a maximum power consumption of 0.1 W.
Power is supplied by direct current from a subscriber line with a nominal voltage of 48 V. If there is no subscriber line voltage, power is supplied from an external power source with a voltage of 48 V with a maximum power consumption of 0.1 W.
FEATURES:
- Speed increase
- The regenerator, by expanding the bandwidth of the ADSL / ADSL2 + access lines put into operation, ensures a speed of 10 Mbps (in the “downstream” direction) per one pair when servicing subscribers at a distance of 5.2 km and a copper core diameter of 0.51 mm .
- The regenerator is also able to increase the range of existing ADSL / ADSL2 / ADSL2 + lines, which serve DSLAM and MSAN and have a minimum length of 3 km, up to 7 km (with a conductor diameter of 0.5 mm).
- Transparent (code-independent) support for pair communication
- The regenerator provides fully transparent (code-independent) support for applications using pairwise communication. Applications range from the simplest, exclusively related to data transmission, where two (2) pairs are connected to provide 10 Mbit / s over a distance of 7 km, to applications that have higher requirements, such as providing 25 Mbit / s over a distance of 4, 2 km in order to provide interactive television (IPTV) services with 3 HD channels and bandwidth.
- Signal to noise ratio improvement
- By amplifying the xDSL signal, the regenerator simultaneously improves the signal-to-noise ratio (SNR) during transmission to the user terminal. By improving the signal-to-noise ratio, the regenerator reduces the level of influence of the binding lines, especially in conditions when the indoor wiring does not meet the necessary requirements.
For more details contact by phone:
Sale of used equipment +375 (29) 796 08 95
Warranty workshop (17) 318 66 93